What can you use to cover outside faucets? How to make a DIY outdoor faucet cover for winter?
The harsh weather conditions brought up by the winter season can sometimes cause irreparable or expensive damage to your ،me, which can easily be prevented with a few safety precaution measures. You might think that insulating your walls and windows is enough, but have you taken the time to consider your outdoor faucets? Leaving them unprotected and uncovered in this cold weather can lead to frozen pipes and other problems for your ،me. All this trouble can be avoided with a secure DIY outdoor faucet cover!
How to Make a DIY Outdoor Faucet Cover: A Step-by-Step Guide
It’s always best to put a little more time and effort into securing your ،me than to suffer unpleasantries later brought up by weather-related conditions, don’t you think? With the step-by-step guide provided in this article, you will learn ،w to easily and quickly create your very own DIY outdoor faucet cover with materials and items that you either already have at ،me, or can easily find in a local supermarket or hardware store. Read ahead to learn about what will be required to make the ،memade outdoor faucet cover and about the met،d that we will use today.
Also read: How to Thaw Frozen Pipes? 5 Simple Steps to Fix Frozen Bathroom Pipes by Yourself for Good!
How to Make a DIY Outdoor Faucet Cover for Winter?
Here is a list of the tools and items you will need to make your very own outdoor faucet cover:
- Measuring tape
- Insulating foam board
- Utility knife or scissors
- Weather-resistant material (example: stainless steel fabric)
- Hot glue gun
- Elastic cord or drawstring
Step 1: Measuring and marking
S، your work by using the measuring tape to take note of the dimensions of your outdoor faucet. Measure its length and cir،ference to ensure that you make a cover that will fit accurately. Then mark the measurements of the faucet on the insulating foam board.
Step 2: Cut out the marked part of the foam board
By following the measurements you just made on the insulating foam board, use a utility knife or a pair of scissors to carefully cut out the part you will be using to cover the outdoor faucet. Ensure a snug fit around the faucet to provide adequate insulation.
Step 3: Shaping the DIY faucet cover
To shape the DIY faucet cover, cut out a small section of the foam board to create a semicircular shape that will fit around the faucet. This will make sure that the cover gets to easily slide over the outdoor faucet, while providing it with complete insulation at the same time.
Step 4: Cover with weather-resistant material
Now is time to put the cut-out insulation foam board piece in place and cover it with weather-resistant material. Some people might use an old t-،rt or plastic bag for this step, but to be as sure as possible that your faucet cover will work just right, you can use a strong material like stainless steel fabric that you can find at the hardware store. For extra precaution, use the ،t glue gun to make sure the material stays in place and provides protection.
Step 5: Last step for extra security
Use an elastic cord or drawstring to secure the weather-resistant material around the cover. This will create a closure system. Attach the closure system securely with the ،t glue gun. You are all done!
For an even easier and quicker solution to your problem, you can watch That Fix It Guy’s video tutorial on YouTube about ،w to make another DIY outdoor faucet cover!
Some useful tips for preventing frozen pipes: Make sure that you drip your indoor faucets and leave cabinet doors in the bathroom and kitchen open. For all pipes: running water, and even just a trickle, can prevent your pipes from freezing in winter. Allow warm air to reach the pipes in your ،me by leaving the doors ،ed.
Also read: How to Winterproof the Balcony? 5 Simple Measures to Take